Anchor Chain Length Calculator
Estimate a starting anchor rode length from water depth and a scope ratio. This simple model treats the rode as chain and does not account for wind, current, bottom conditions, or vessel-specific guidance.
Calculators
Planning tools related to coastal conservation, with visible assumptions and clearly explained results.
Estimate a starting anchor rode length from water depth and a scope ratio. This simple model treats the rode as chain and does not account for wind, current, bottom conditions, or vessel-specific guidance.
Estimate an appliance’s electricity use in kilowatt-hours from its rated power, daily operating time, and days used. The estimate assumes the appliance draws its rated power whenever it runs.
Calculate a boat’s engine power-to-mass ratio in kilowatts per tonne using engine power and loaded boat mass.
Estimate a boat's fuel use per hour and trip fuel requirement from measured fuel consumed, engine running time, and planned trip duration. The estimate assumes the measured hourly rate stays constant.
Estimate the fuel cost for a boat trip from distance, cruising speed, hourly fuel consumption, and fuel price. The estimate assumes steady speed and fuel use throughout the trip.
Subtract boat draft from the water depth at a launch ramp to estimate the remaining depth clearance in meters. This simple estimate assumes both measurements describe the same location and conditions.
Estimate average boat speed from distance traveled and elapsed time. Choose the distance and time units to see the result in knots.
Use your own inputs to calculate the result for boat trip distance.
Estimate the upward buoyant force on an object from the volume of fluid it displaces and the fluid's density. Enter volume in cubic meters and density in kilograms per cubic meter. The result is in newtons and does not account for object weight or environmental effects.
Estimate annual tailpipe carbon dioxide emissions from a car using distance driven, fuel economy, and a fuel emission factor. The estimate excludes vehicle manufacturing and other lifecycle emissions.
Estimate the carbon dioxide equivalent (CO₂e) of reported greenhouse gas emissions by applying user supplied global warming potential factors to each gas quantity. Enter each gas amount in tonnes and the corresponding factor for the assessment period and source you are using.
Estimate annual household emissions from home energy, driving, and flights using the fixed worksheet factors shown in the formula. This simplified estimate is for learning and comparison, not an audited inventory.
Calculate carbon intensity as user-reported greenhouse gas emissions divided by economic output for a chosen period. Enter emissions in metric tons of CO₂e and output in thousands of dollars, using consistent boundaries and reporting periods.
Estimate the cost of offsetting an annual amount of emissions using a price per metric tonne that you provide. This simple estimate does not assess project quality or verify emissions data.
Estimate the carbon-to-nitrogen ratio of a compost batch from the masses and carbon and nitrogen fractions of its materials. Fractions are entered as decimals from 0 to 1.
Estimate the weight of material in a dumpster by multiplying the load volume by its assumed average material density. Enter volume in cubic yards and density in pounds per cubic yard. This is a planning estimate, not a scale measurement.
Estimate and compare annual driving emissions for an electric vehicle and a gasoline vehicle using your distance, energy-use figures, and emissions factors. Results cover use-phase driving emissions only and depend on the factors you enter.
Estimate an appliance's electricity use over a chosen period from its power rating, daily operating time, and days of use. This is an energy estimate in kilowatt-hours (kWh), not a bill or cost forecast.
Estimate the electricity cost of an appliance or activity from its power use, operating time, and your electricity rate.
Estimate the purchase cost of food your household discards over a chosen period using the amount wasted and its average cost per unit.
Convert a volume in US gallons to liters using the exact US gallon conversion factor.
Add annual greenhouse gas emissions already expressed in kilograms of carbon dioxide equivalent (kg CO2e) across four activity categories to estimate a combined annual total. Enter values from a consistent source and reporting period.
Estimate annual heating cost savings by comparing your current heating system's yearly cost with the estimated yearly cost of a heat pump. This worksheet uses your electricity and fuel prices and stated system efficiencies; it excludes installation costs and other charges.
Estimate annual household energy cost savings from a change in electricity use and the rates you enter. This simple worksheet model assumes the entered energy reduction applies throughout the year and excludes fixed charges, equipment costs, incentives, and rate changes.
Estimate annual household emissions from home energy, vehicle travel, and air travel using simple illustrative emission factors. The result covers only these selected sources and is not a complete inventory.
Estimate daily household water use in gallons from household size and typical daily indoor activities. The estimate uses fixed per-person and per-use assumptions, so actual meter readings may differ.
Estimate liters used for showers and laundry over a chosen number of days. The estimate assumes the entered shower and laundry rates stay constant throughout the period.
Estimate how many empty cans make one pound or how much a known number of cans weigh, using the average weight of one can.
Estimate a displacement boat’s theoretical hull speed in knots from its waterline length using the traditional 1.34 × square root of waterline length in feet rule. This is a planning estimate, not a guaranteed operating speed.
Convert a vessel's speed in knots to miles per hour using the standard conversion factor of 1 knot = 1.15078 miles per hour.
Estimate straight-line distance between two charted positions from their latitude and longitude using a local planar approximation. This is a planning estimate, not a navigational route distance.
Convert a distance in nautical miles to kilometers using the standard conversion factor of 1.852 kilometers per nautical mile.
Convert a distance in nautical miles to statute miles using the standard conversion factor of 1 nautical mile = 1.15078 statute miles.
Estimate the mass of plastic packaging and disposable items your household uses over a chosen period, based on item counts, average weights, and the number of people sharing the total. This is a usage estimate, not a lifecycle or environmental-impact assessment.
Estimate theoretical boat speed from propeller pitch and engine RPM using the selected gear ratio. This calculation assumes zero propeller slip and is a geometric estimate, not a real-world speed or propeller recommendation.
Estimate the annual volume of rainwater that could run off a roof using roof area, annual rainfall, and an assumed roof runoff factor. The estimate is before storage, overflow, and water-use losses.
Estimate kilograms of carbon dioxide equivalent per passenger for a road trip using trip distance, fuel consumption, an emissions factor per liter, and the number of travelers.
Estimate underway time from route distance, average speed, and planned hours for stops or delays. This estimate assumes steady progress and does not account for changing weather, currents, or navigation restrictions.
Estimate the gross value of sorted scrap metal from its weight and the per-pound prices quoted by a buyer. Enter each material separately. The result is a planning estimate and does not account for inspection adjustments, deductions, or changes in buyer pricing.
Estimate daily and annual solar panel electricity production from panel rating, panel count, peak-sun hours, and an assumed system efficiency.
Estimate how many years it may take for an upfront solar system cost, after a one-time incentive, to be offset by your estimated annual electricity bill savings. This simple payback estimate assumes annual savings stay constant and excludes financing, maintenance, and future changes in energy prices.
Estimate the volume of stormwater runoff from a rainfall event using site area, impervious surface percentage, and an assumed pervious-surface runoff coefficient. The result is a planning estimate in cubic feet, not a peak-flow or drainage-design calculation.
Estimate carbon dioxide sequestered by a group of trees over a chosen period using a user-supplied average annual uptake per tree. This simple worksheet does not model species, age, site conditions, mortality, or changes in growth.
Estimate a vessel’s displacement from its length, beam, draft, and a selected hull form coefficient. Enter dimensions in meters to calculate an approximate displaced-water volume in cubic meters.
Estimate the share of generated waste diverted from disposal by recycling, composting, reuse, or other recovery. Enter all quantities in the same unit and time period.
Estimate a water bill from metered usage, a usage rate, a fixed service charge, and a sewer charge per unit. This simplified estimate assumes one flat rate for all water used and does not model tiered pricing, taxes, or other local fees.
Estimate the volume of water displaced by a fully submerged object from its mass and material density. Choose units consistently. The result assumes the object is fully submerged and does not account for trapped air or changes in water level caused by vessel shape.
Estimate average water flow rate by dividing a measured volume by the time taken to collect it. Use consistent units for the resulting rate.
Estimate the average wave period from the time it takes a chosen number of waves to pass a fixed point.
Calculate a wave's speed from its frequency and wavelength using the relationship speed equals frequency times wavelength. This model assumes a uniform medium and uses the values you provide.